Resin bound (stones mixed with resin then trowelled) is fully permeable, smooth and highly durable. Resin bonded (resin spread then loose stone scattered) is non-permeable with a rougher finish. Supa Resin specialises in the superior, permeable resin bound system.

When professionally installed and maintained, a high-quality resin bound driveway typically lasts 15–25 years. Longevity depends on resin quality and sub-base preparation—both core to the Supa Resin process.

Yes. Properly installed resin bound is fully permeable (SuDS compliant), allowing water to drain through the surface into the sub-base—usually removing the need for planning permission.

No. The selected aggregates provide strong slip resistance. Supa Resin can also add a light sprinkle of fine crushed glass/anti-slip granules for maximum grip in wet or icy conditions.

Often yes—if the base is structurally sound. Supa Resin carries out a full site survey to confirm stability and preparation requirements before installation.

Typical installs take 1–3 days depending on size/complexity and base prep. Usual cure times: foot traffic ~24 hours; vehicles ~48 hours after completion.

Minimal maintenance: occasional sweeping and rinsing with a hose or a pressure washer on a fan setting at a safe distance. For stubborn marks, use a mild detergent. Avoid boiling water or solvent cleaners.

A wide palette of blends—from natural golds, browns and buff tones to contemporary slate grey and charcoal. Choose single-aggregate or custom blends to match your home.

Weed growth is highly inhibited: the surface is joint-free with stone-to-stone contact over a solid base. Any wind-blown seeds on the surface are easily removed with a stiff brush or light pressure wash.

Pricing depends on area size, existing sub-base condition/prep, and chosen aggregate/colour. Supa Resin provides a free, no-obligation site survey and tailored quotation.